| |
|
|
|
|
|
|
|
PTP LAMINATOR - quickly installs reflective and vinyl sheeting to aluminum, plastic, or plywood signs. |
 |
| |
|
|
|
|
|
|
| |
Great for laminating, mounting prints to boards or applying transfer tapes |
 |
|
| |
|
Provides many features found in
more expensive laminators:
• Heavy duty motor
• Automatic take up shaft
• Shaft for liner paper in front
• Silicone covered rollers
• Rugged steel and aluminum construction |
|
 |
|
| |
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
PTP LAMINATOR makes laminating easy. Just follow a few simple steps: |
| |
|
|
|
 |
| |
|
|
|
|
|
|
1.
Insert the hubs into the laminate
core (all laminate rolls have
3" cores) |
|
 |
| |
|
|
|
2.
Shafts lift easily out of channels,
so laminate rolls can be changed
quickly. Collars keep the rolls
in place on the shaft. |
|
 |
| |
|
|
3.
Two pulleys (one is hidden in
the photo) and a belt drive
the take up shaft
|
|
 |
| |
|
|
4.
Two knobs set the height and
pressure of top roller (it is easy
to set the pressure properly)
Accepts boards up to 1" thick.
|
|
 |
| |
|
|
5.
Thread liner paper (from front
shaft) between the rollers. This
will keep the laminate from
sticking to the rollers while
laminating.
|
|
 |
| |
|
|
6.
Tape release paper (from
back of laminate) to core
on take up shaft.
|
|
 |
| |
|
|
7.
Thread laminate through
rollers.
|
|
 |
| |
|
|
8.
Run your print through
the rollers.
|
|
 |
| |
|
|
|
| |
|
|
|
|
|
After the print exits out the back, go to the back of the laminator, cut off the laminate, trim and you have a perfectly laminated print. You can then simply run through the next print without going through any more set up since the laminate and liner paper are already threaded through the rollers.
|
| |
|
|
|
|
|
|
| |
|
|
|
Options |
|
|
| |
|
|
|
|
|
Stand |
| |
|
|
|
|
|
Rolling stand is made from steel with four castors. It makes your PTP LAMINATOR mobile, while saving table space. Silver entry deck is 37" high when placed on stand.
The Stand is ALL STEEL Construction with modern 180 degrees casters with wheel locks.
Please specify which size Laminator you will be ordering for.
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
Footswitch |
| |
|
|
|
|
|
Footswitch provides hands free control.
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
PTP LAMINATOR - quickly installs reflective and vinyl sheeting to aluminum, plastic, or plywood signs. |
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
Price Traffic Products carries a full line of cold laminates in
three finishes: gloss, luster or matte. Gloss is
normally used when you need to add glossiness to
your finished print. Luster, the most popular
finish, is used indoors to eliminate glare and
provides a very natural look. Matte is used when
you want to tone down the finish. Available in
25", 38", 51" and 54" widths. |
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
Mounting reflective or vinyl sheeting to substate |
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
Apply mounting adhesive |
| |
|
|
|
|
|
Place a roll of mounting adhesive on the back shaft (for most adhesives you do not need the take up shaft). Run your board through to apply adhesive. It comes out with a release paper covering the adhesive on the board so you can use it at any time. |
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
Mount prints to reflective and vinyl sheeting to aluminum, plastic, or plywood signs. |
| |
|
|
|
|
|
Pull back the first two inches of the release liner covering your board or media to expose the adhesive. Position your print on the board, then rub down the first two inches to the exposed adhesive.
Place the board/print into the PTP LAMINATOR rollers, drape the print over the top roller (as shown in photo) and run it through the rollers. You get a smooth mount every time.
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
Specifications |
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
Roller Widths |
|
25",
38", 55" or 65" |
Board Thickness |
|
up to 1" thick |
Speed |
|
8 seconds per foot
(or 7.5 ft. per minute) |
Electrical |
|
110 volt (U.S.) or
230 volts (for overseas) |
|
Outside Dimensions |
25" |
17"
W x 31" L |
38" |
17"
W x 44" L |
55" |
17"
W x 61" L |
65" |
17"
W x 71" L |
|
